*. The machine seal the top and side cover of the battery with aluminum foil *. It is easy to change the mold. *. Production capacity: 280 pieces / hour at 12V *. Touch panel control system, for easy setup and modify. *. State of the art guide rail to keep battery surface excellent. *. When the air pressure is insufficient, the machine will auto-stop and alarm will buzz at the same time.
*. It can be designed to compartment test leak according to customer’s selection. *. It can be designed to suck air or blow air according to customer’s selection. *. It can be designed to make precise testing or normal testing according to customer’s selection. *. It is easy to change the testing mold. *. Capacity: 240 - 300 pcs/hour （12V） *. The electric control is adopted touch panel system, it’s easy to operate and setup. *. When the battery transported by conveyor, it doesn’t rub on the guide rail to protect surface. *. If the air pressure is not enough, the machine will auto-stop and alarm at the same time.
*. It is suitable to the thru-the partition intercell connection welds for all Conventional and MF types of motorcycle battery. *. It is equipped with auto shift position system of weld head for X axis. *. The controller of the thru-the partition intercell connection welds uses CY-210C or it can be changed under customer’s requirement (cost changes). *. It’s easy to adjust machine accurately for working other type of battery. *. Pneumatic cylinder for cleaner and easy to maintain. *. Production capacity: 2400~2800 pcs / 7 hours. *. Equipped with the system of auto-stop of no feeding, auto-start of re-feeding. *. Touch panel control system for easy setup and modification. *. 50 KVA transformer for each Weld Jaw. *. Rejection station.